Onkyo TX-RZ820, Basic Manual

Page: 38 / 104

2
> Network Functions > Specifications > Advanced Setup > Listening Modes
Troubleshooting Supplementary Information, etc� |
> Basic Manual
General Specifications
■
Amplifier Section
Rated Output Power (FTC) (North American)
With 8 ohm loads, both channels driven, from 20-
20,000 Hz; rated 130 watts per channel minimum
RMS power, with no more than 0.08% total harmonic
distortion from 250 milliwatts to rated output.
Surround Mode Output Power (
＊
)
(6 ohms, 1 kHz THD 0.9%) 200 W per channel
＊
Reference output for each speakers.
Depending on the source and the listening mode
settings, there may be no sound output.
Rated Output Power (IEC) (European, Asian and
Australian)
7 ch
×
180 W at 6 ohms, 1 kHz, 1 ch driven of 1%
THD
Maximum Effective Output Power (JEITA)
7 ch
×
250 W at 6 ohms, 1 kHz, 1 ch driven of 10%
THD (North American)
7 ch
×
215 W at 6 ohms, 1 kHz, 1 ch driven of 10%
THD (Asian and Australian)
Dynamic Power (
＊
)
＊
IEC60268-Short-term maximum output power
300 W (3
Ω
, Front)
250 W (4
Ω
, Front)
150 W (8
Ω
, Front)
THD+N (Total Harmonic DisNoise)
0.08% (20 Hz - 20,000 Hz, half power)
Input Sensitivity and Impedance (1 kHz 100 W/8
Ω
)
200 mV/47 k
Ω
(LINE (Unbalance))
3.5 mV/47 k
Ω
(PHONO MM)
Rated RCA Output Level and Impedance
1 V/320
Ω
(PRE OUT)
1 V/470
Ω
(SUBWOOFER PRE OUT)
200 mV/2.3 k
Ω
(ZONE LINE OUT)
1 V/2.3 k
Ω
(ZONE PRE OUT)
Phono Overload
70 mV (MM 1 kHz 0.5%)
Frequency Response
5 Hz - 100 kHz/+1 dB, –3 dB (Direct/Pure Audio)
Tone Control Characteristics
±
10 dB, 90 Hz (BASS)
±
10 dB, 7.5 kHz (TREBLE)
Signal to Noise Ratio
106 dB (IHF-A, LINE IN, SP OUT)
80 dB (IHF-A, PHONO IN, SP OUT)
Speaker Impedance
4
Ω
- 16
Ω
Headphone Output Impedance
330
Ω
Headphone Rated Output
85 mW (32
Ω
, 1 kHz, 10% THD)
■
Video Section
Signal level
1 Vp-p/75
Ω
(Composite Video)
1 Vp-p/75
Ω
(Component Video Y)
0.7 Vp-p/75
Ω
(Component Video B/R)
Maximum resolution supported by component video
480i/576i
■ Tuner Section
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz (North American)
87.5 MHz - 108.0 MHz, RDS (Others)
AM Tuning Frequency Range
530 kHz - 1710 kHz (North American)
522/530 kHz - 1611/1710 kHz (Others)
Preset Channel
40
■ Network Section
Ethernet LAN
10BASE-T/100BASE-TX
Wireless LAN
IEEE 802.11 a/b/g/n standard
(Wi-Fi
R
standard)
5 GHz/2.4 GHz band
■
BLUETOOTH Section
Communication system
BLUETOOTH Specification version 4.1+LE
Frequency band
2.4 GHz band
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
A2DP 1.2
AVRCP 1.3
HOGP-Host (Client)
HOGP-HID Device (Server)
HID Service (HIDS)
Supported Codecs
SBC
AAC
Transmission range (A2DP)
20 Hz - 20 kHz (Sampling frequency 44.1 kHz)
Maximum communication range
Line of sight approx. 15 m (
＊
)
½
The actual range will vary depending on factors
such as obstacles between devices, magnetic fields
around a microwave oven, static electricity, cordless
phone, reception sensitivity, antenna's performance,
operating system, software application, etc.
■ General
Power Supply
AC 120 V, 60 Hz (North American)
AC 220 - 240 V, 50/60 Hz (Others)
Power Consumption
650 W (North American)
710 W (Others)
0.15 W (Stand-by)
70 W (No-sound)
5.7 W (HDMI Standby Through, North American)
5.9 W (HDMI Standby Through, Others)