background image

111

Setup

Setup

1. Input/Output Assign

 

‰

HDMI 4K/8K Signal Format

Set the 4K/8K signal format input and output by this unit. Set to suit the TV or 

player connected.

• 

The corresponding resolution is different depending on the HDMI jack 

connected. See "Corresponding input resolutions" ( 

p186

) for details.

BD/DVD 

(Default Value: 4K Enhanced)  

GAME  

(Default Value: 4K Enhanced) 

CBL/SAT 

(Default Value: 4K Enhanced) 

STRM BOX  (Default Value: 4K Enhanced) 

PC   

(Default Value: 4K Enhanced) 

CD    

(Default Value: 4K Enhanced) 

TV    

(Default Value: 4K Enhanced) 

PHONO  

(Default Value: 4K Enhanced)

4K Standard

When using a High Speed HDMI Cable that supports 

10.2 Gbps to connect a TV or player compatible with standard 

4K signal formats (4K 30Hz, etc.)

4K Enhanced When using a Premium High Speed HDMI Cable that supports 

18 Gbps to connect a TV or player compatible with high-

definition 4K signal formats (4K 60Hz, 4K HDR, etc.)

• 

There may be some image disruption depending on the 

connected component and the HDMI cable. If this occurs, 

switch to "4K Standard".

8K Standard

When using a PREMIUM High Speed HDMI Cable that 

supports 18Gbps to connect a TV or player compatible with 4K 

120Hz, 5K 30Hz, or 8K 30Hz signal formats

8K Enhanced

When using an ULTRA High Speed HDMI Cable that supports 

48Gbps High Speed HDMI Cable to connect a TV or player 

compatible with 5K 60Hz or 8K 60Hz signal formats

 

‰

Zone 2 HDMI (Default Value: Not Use)

Make the setting when you output to the Zone 2 TV connected to the HDMI OUT 

SUB/ZONE 2 jack.

Use

Enable this function

Not Use

Disable this function

• 

When video and audio via HDMI input are output to ZONE 2, 

set it to "Use".

 

‰

OSD Language (Default Value: English)

Select the on-screen display language from the following.

(North American models) English, German, French, Spanish, Italian, Dutch, 

Swedish

(European, Australian and Asian models) English, German, French, Spanish, 

Italian, Dutch, Swedish, Russian, Chinese

 

‰

Impose OSD (Default Value: On)

Set whether or not to display information such as volume adjustment or 

switching of input on the TV screen.

On

OSD is displayed on the TV

• 

OSD may not be displayed depending on the input signal 

even if "On" is selected. In this case, change the resolution 

of the connected device.

Off

OSD is not displayed on the TV

Summary of Contents for TX-NR7100
































































































































































































Reviews: