background image

145

Appendix

Listening Mode Effects

In alphabetical order

 

„

AllCh Stereo

This mode is ideal for background music. Stereo sound is played through the 

surround speakers as well as the front speakers, creating a stereo image.

 

„

 Atmos 

Since this mode calculates the positional data of audio recorded in Dolby Atmos 

audio in real-time and outputs it from appropriate speakers, you can enjoy the 

natural and stereophonic sound field of Dolby Atmos with any speaker layout 

including connection of only front speakers. Also, the Dolby Atmos sound design 

can be reproduced more faithfully by connecting surround back speakers or 

height speakers. You can select this mode when inputting the Dolby Atmos 

audio format.

Unlike existing surround systems, Dolby Atmos does not rely on channels, but 

rather enables the accurate placement of sound objects that have independent 

motion in a 3D space with even greater clarity. Dolby Atmos is an optional 

audio format for Blu-ray Discs and achieves a more stereophonic sound field by 

introducing a sound field above the listener.

According to the speaker layout, the following listening modes are displayed.

 

 

Atmos 2.0/2.1

: When only front speakers are installed

 

 

Atmos 3.0/3.1

: When front speakers and center speaker are installed

 

 

Atmos 4.0/4.1

: When front speakers and surround speakers are 

installed

 

 

Atmos 5.0/5.1

: When front speakers, center speaker and surround 

speakers are installed

 

 

Atmos 6.0/6.1

: When front speakers, surround speakers and surround 

back speakers are installed

 

 

Atmos 7.0/7.1

: When front speakers, center speaker, surround speakers 

and surround back speakers are installed

 

 

Atmos 2.0.2/2.1.2

: When front speakers and height speakers are 

installed

 

 

Atmos 3.0.2/3.1.2

: When front speakers, center speaker and height 

speakers are installed

 

 

Atmos

: Selectable in the "4.1.2 ch" or "5.1.2 ch" setting with surround 

speakers and height speakers installed.

•  To enable transfer of this audio format, connect via an HDMI cable and set 

the audio output on the player to Bitstream output.

•  When "Speaker Virtualizer" ( 

p100

) is set to "Off" (Default: On), modes 

other than   Atmos cannot be selected.

 

„

 DD (Dolby Audio - DD)

This mode faithfully reproduces the sound design recorded in the Dolby Digital 

audio format.

Dolby Digital is a multi-channel digital format developed by Dolby Laboratories, 

Inc. and is widely adopted for use in movie production. It is also a standard audio 

format for DVD-Video and Blu-ray Discs. It is possible to record a maximum of 

5.1 channels on a DVD-Video or Blu-ray Disc; two front channels, one center 

channel, two surround channels, and the LFE channel dedicated to the bass 

region (sound elements for the subwoofer).

•  To enable transfer of this audio format, connect via a digital cable and set the 

audio output on the player to Bitstream output.

 

„

 DD+ (Dolby Audio - DD+)

This mode faithfully reproduces the sound design recorded in the Dolby Digital 

Plus audio format.

The Dolby Digital Plus format has been improved based on Dolby Digital, 

increasing the number of channels and endeavoring to improve sound quality 

by giving more flexibility in data bit rates. Dolby Digital Plus is an optional audio 

format based on 5.1 ch for Blu-ray Discs. It is possible to record a maximum of 

7.1 channels with additional channels such as the surround back channel.

•  To enable transfer of this audio format, connect via an HDMI cable and set 

the audio output on the player to Bitstream output.

Summary of Contents for TX-NR5100
































































































































































Reviews: