background image

53

Before Start

Part Names

Install

Initial Setup

Playback

Supplementary Information Advanced Setup |

Others

E

N

License and Trademark Information

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro 

Logic, and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from 

DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol, the DTS-HD 

logo, and DTS-HD Master Audio are registered trademarks or trademarks of 

DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights 

Reserved.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI 

Logo are trademarks or registered trademarks of HDMI Licensing LLC in the 

United States and other countries.

The Wi-Fi CERTIFIED Logo is a certification mark of Wi-Fi Alliance

®

.

AirPlay, iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in 

the U.S. and other countries.

iPad Air and iPad mini are trademarks of Apple Inc.

“Made for iPod”, “Made for iPhone” and “Made for iPad” mean that an electronic 

accessory has been designed to connect specifically to iPod, iPhone, or iPad, 

respectively, and has been certified by the developer to meet Apple 

performance standards. Apple is not responsible for the operation of this device 

or its compliance with safety and regulatory standards.

Please note that the use of this accessory with iPod, iPhone or iPad may affect 

wireless performance.

AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac 

with OS X Mountain Lion or later, and PC with iTunes 10.2.2 or later.

The BLUETOOTH

®

 word mark and logos are registered trademarks owned by 

Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under 

license. Other trademarks and trade names are those of their respective 

owners.

Onkyo Corporation does not guarantee BLUETOOTH compatibility between the 

AV receiver and all BLUETOOTH enabled devices.

For compatibility between the AV receiver and another device with 

BLUETOOTH technology, consult the device’s documentation and dealer. In 

some countries, there may be restrictions on using BLUETOOTH devices. 

Check with your local authorities.

Onkyo Corporation ne garantit pas la compatibilité BLUETOOTH entre l'ampli-

tuner AV et tous les appareils compatibles BLUETOOTH.

Pour assurer la compatibilité entre l'ampli-tuner AV et un autre périphérique à 

technologie BLUETOOTH, consultez la documentation de l'appareil et le 

vendeur. Dans certains pays, il peut exister des restrictions sur l'utilisation 

d'appareils BLUETOOTH. Vérifiez auprès des autorités locales.

Onkyo Corporation no garantiza la compatibilidad BLUETOOTH entre el 

receptor de AV y todos los dispositivos con tecnología BLUETOOTH.

Para obtener información sobre la compatibilidad entre el receptor de AV y otro 

dispositivo con tecnología BLUETOOTH, consulte al distribuidor y la 

documentación del dispositivo. En algunos países, es posible que el uso de 

dispositivos BLUETOOTH esté restringido. Consulte con las autoridades 

locales.

Onkyo Corporation non garantisce la compatibilità BLUETOOTH tra il ricevitore 

AV e tutti i dispositivi abilitati al BLUETOOTH. 

Per verificare la compatibilità tra il ricevitore AV e un altro dispositivo dotato di 

tecnologia BLUETOOTH, consultare la documentazione del dispositivo in 

questione o contattare il rivenditore. In alcuni Paesi potrebbero esistere delle 

limitazioni per l'utilizzo di dispositivi BLUETOOTH. Verificare le condizioni con le 

autorità locali.

Onkyo Corporation garantiert nicht die BLUETOOTH Kompatibilität zwischen 

dem AV-Receiver und allen BLUETOOTH fähigen Geräten.

Zur Kompatibilität zwischen dem AV-Receiver und einem anderen Gerät mit 

BLUETOOTH Technologie, schauen Sie in die Dokumentation des Geräts und 

fragen Sie den Händler. Es kann sein, dass es in einigen Ländern 

Beschränkungen zur Nutzung der BLUETOOTH Geräte gibt. Prüfen Sie das bei 

Ihren lokalen Behörden.

Onkyo Corporation garandeert niet de BLUETOOTH compatibiliteit tussen de 

AV-receiver en alle BLUETOOTH apparaten.

Raadpleeg voor compatibiliteit tussen de AV-receiver en een ander apparaat 

met BLUETOOTH technologie de documentatie van het apparaat of de 

verkoper. In sommige landen geldt mogelijk een beperking op het gebruik van 

BLUETOOTH apparatuur. Controleer de wetgeving in het land van gebruik.

Onkyo Corporation garanterar inte BLUETOOTH kompatibilitet mellan AV-

receiver och alla BLUETOOTH aktiverade enheter. 

För kompatibilitet mellan AV-receiver och en annan enhet med BLUETOOTH 

teknik, se enhetens dokumentation och återförsäljaren. I vissa länder kan det 

finnas begränsningar för användandet av BLUETOOTH enheter. Kontrollera 

hos de lokala myndigheterna.

PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks 

or registered trademarks of Pandora Media, Inc. Used with permission.

The product with this logo is conformed to Hi-Res Audio standard defined by 

Japan Audio Society. This logo is used under license from Japan Audio Society.

This product is protected by certain intellectual property rights of Microsoft. Use 

or distribution of such technology outside of this product is prohibited without a 

license from Microsoft.

Windows and the Windows logo are trademarks of the Microsoft group of 

companies.

QR Code is a registered trademark of DENSO WAVE INCORPORATED.

“x.v.Color” and “x.v.Color” logo are trademarks of Sony Corporation.

DSD and the Direct Stream Digital logo are trademarks of Sony Corporation.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and 

Thomson.

Music Optimizer is a trademark of Onkyo Corporation.

®

Summary of Contents for TX-L20D
























































Reviews: