> Install
> Playback
Advanced Setup | Supplementary Information |
55
En
settings and connections with your TV. To adjust, press
AUDIO on the remote controller, and adjust in "Other" -
"A/V Sync".
∫
Linked operation
There is no linked operation with CEC compliant
devices, such as a TV.
0
The "5. Hardware" - "HDMI" - "HDMI CEC" setting in the
Setup menu needs to be set to "On".
0
It is also necessary to set HDMI linking on the CEC
compliant device. Check the instruction manual.
∫
AM/FM broadcasting
Radio reception is poor or there is a lot of noise.
0
Re-check the antenna connection.
0
Separate the antenna from speaker cables and the
power cord.
0
Move the unit away from your TV or PC.
0
Passing cars and airplanes can cause interference.
0
Concrete walls weaken radio signals.
0
Listen to the station in mono.
0
When listening to an AM station, operating the remote
controller may cause noise (North American models).
0
FM reception may become clearer if you use the antenna
jack on the wall used for the TV.
∫
The BLUETOOTH feature
0
Try plugging/unplugging the power of the unit and try
turning on/off the BLUETOOTH wireless technology
enabled device. Restarting the BLUETOOTH wireless
technology enabled device may be effective.
0
The BLUETOOTH wireless technology enabled devices
must support the A2DP profile.
0
Radio wave interference may occur in the vicinity of
components, such as microwave ovens or cordless
phones, which use radio waves in the 2.4 GHz range.
This interference may render this unit unusable.
0
If there is a metallic object near the unit, BLUETOOTH
connection may not be possible as the metal can effect
on the radio waves.
Check the following if the above does not fix the problem:
Cannot connect with this unit
0
Check that the BLUETOOTH function of the
BLUETOOTH wireless technology enabled device is
enabled.
Music playback is unavailable on the unit even after
successful BLUETOOTH connection
0
When the audio volume of your BLUETOOTH wireless
technology enabled device is set low, the playback of
audio may be unavailable. Turn up the volume on the
BLUETOOTH wireless technology enabled device.
0
Some BLUETOOTH wireless technology enabled
devices may be equipped with a Send/Receive selector
switch. Select Send mode.
0
Depending on the characteristics or specifications of
your BLUETOOTH wireless technology enabled device,
playback on this unit may not be possible.
Sound is interrupted
0
There may be a problem with the BLUETOOTH wireless
technology enabled device. Check the information on the
internet.
The audio quality is poor after connection with a
BLUETOOTH wireless technology enabled device
0
Reception is poor. Move the BLUETOOTH wireless
technology enabled device closer to the unit or remove
any obstacle between the BLUETOOTH wireless
technology enabled device and this unit.
∫
Network Functions
0
If you cannot select a network service, it will become
selectable when the network function is started. It may
take about a minute to start up.
0
When NET is blinking, the AV receiver is not properly
connected to the home network.
0
Try plugging/unplugging the power supply of this unit and
the router, and try rebooting the router.
0
If the desired wireless LAN router is not in the access
point list, it may be set to hide SSID or the ANY
connection may be off. Change the setting and try again.
Check the following if the above does not fix the problem:
Cannot access the Internet radio
0
Certain network service or contents available through the
unit may not be accessible in case the service provider
terminates its service.
0
Make sure that your modem and router are properly
connected, and make sure they are both turned on.
0
Make sure that the LAN side port on the router is
properly connected to the AV receiver.
0
Make sure that connecting to Internet from other
components is possible. If connecting is not possible,
turn off all components connected to the network, wait for
a while, and then turn on the components again.
0
If a specific radio station is unavailable for listening,
make sure the registered URL is correct, or whether the
format distributed from the radio station is supported by
the AV receiver.
0
Depending on ISP, setting the proxy server is necessary.
0
Make sure that the router and/or modem you are using is
supported by your ISP.
Cannot access the network server
0
This unit needs to be connected to the same router as
the network server.
0
This unit is compatible with Windows Media
®
Player 11
or 12 network servers or NAS that are compatible with
