E
n
Enjoying Home Theater
The Home Theater means that you can enjoy surround sound with a real sense of movement in your own home — just like being in
a movie theater or concert hall.
Connecting the Speakers
Corner
position
1/3 of wall
position
Center speaker (SKC-338)
Position it close to your TV (preferably
on top) facing forward at about ear
level, or at the same height as the
front left and right speakers.
Front left and right speakers (SKF-338)
They should be positioned facing the listener at about ear level,
and equally spaced from the TV. Angle them inward slightly so
as to create a triangle, with the listener at the apex.
Surround left and right speakers (SKR-338)
Position them at the sides of the listener, or
slightly behind, about 60 to 100 cm (2 to 3 feet)
above ear level. Ideally they should be equally
spaced from the listener.
Subwoofer (SKW-338)
The subwoofer handles the bass sounds of the LFE (Low-Frequency Effects)
channel. The volume and quality of the bass output from your subwoofer will
depend on its position, the shape of your listening room, and your listening posi-
tion. In general, a good bass sound can be obtained by installing the subwoofer
in a front corner, or at one-third the way along the front wall, as shown.
Red
White
Blue
Green
Front right
speaker
Center speaker
Gray
Front left
speaker
Surround right
speaker
Surround left
speaker
Subwoofer
Speaker Connection
Precautions
Read the following before connecting your
speakers:
• Turn off your receiver before making any
connections.
• Pay close attention to speaker
wiring polarity. Connect posi-
tive (+) terminals to only pos-
itive (+) terminals, and
negative (–) terminals to only negative (–)
terminals. If the speakers are wired incor-
rectly, the sound will be out of phase and
will sound unnatural.
• Be careful not to short the positive and
negative wires. Doing so may damage
your amp.
Purple
Specifications
■
Passive Subwoofer (SKW-338)
■
Front Speakers (SKF-338)
■
Center Speaker (SKC-338)
■
Surround Speakers (SKR-338)
Specifications and appearance are subject to change without
prior notice.
Type
Bass-reflex type Passive subwoofer
Impedance
6
Ω
Maximum output power
130 W
Sensitivity
82 dB/W/m
Frequency response
30 Hz to 150 Hz
Cabinet capacity
24 L (0.8 cubic feet)
Dimensions (W
×
H
×
D)
211 mm
×
425 mm
×
381 mm
(8-5/16"
×
16-3/4"
×
15")
(incl. projection)
Weight
5.5 kg (12.1 lbs.)
Drivers unit
16 cm (6-5/16") Cone
×
1
Terminal
Spring type color coded
Power consumption
50 W
Type
Full Range Bass-reflex
Impedance
6
Ω
Maximum input power
120 W
Sensitivity
82 dB/W/m
Frequency response
80 Hz to 20 kHz
Cabinet capacity
1.0 L (0.036 cubic feet)
Dimensions (W
×
H
×
D)
101 mm × 161 mm × 111 mm
(4"
×
6-5/16"
×
4-3/8")
(incl. grille and projection)
Weight
0.8 kg (1.76 lbs.)
Drivers unit
8 cm (3-1/4") Cone
×
1
Terminal
Spring type color coded
Keyhole slot
1
Grille
Fixed
Other
Magnetic shielding
Type
Full Range Bass-reflex
Impedance
6
Ω
Maximum input power
120 W
Sensitivity
82 dB/W/m
Frequency response
80 Hz to 20 kHz
Cabinet capacity
1.4 L (0.05 cubic feet)
Dimensions (W
×
H
×
D)
230 mm
×
102 mm
×
113 mm
(9-1/16"
×
4"
×
4-7/16")
(incl. grille and projection)
Weight
0.9 kg (2.0 lbs.)
Drivers unit
8 cm (3-1/4") Cone
×
1
Terminal
Spring type color coded
Keyhole slot
2
Grille
Fixed
Other
Magnetic shielding
Type
Full Range Bass-reflex
Impedance
6
Ω
Maximum input power
120 W
Sensitivity
82 dB/W/m
Frequency response
80 Hz to 20 kHz
Cabinet capacity
1.0 L (0.036 cubic feet)
Dimensions (W
×
H
×
D)
101 mm
×
161 mm
×
111 mm
(4"
×
6-5/16"
×
4-3/8")
(incl. grille and projection)
Weight
0.7 kg (1.3 lbs.)
Drivers unit
8 cm (3-1/4") Cone
×
1
Terminal
Spring type color coded
Keyhole slot
1
Grille
Fixed
*2
Non-magnetic shielding.
Caution
• The front grilles are not designed to be removed so do not attempt
to remove them forcibly, as this will damage them.
Using the Floor Pads for Subwoofer
If the subwoofer is placed on a hard
floor (wood, vinyl, tile, etc.) and
playback is very loud, the sub-
woofer’s feet may damage the floor-
ing. To prevent this, place the
supplied pads underneath the sub-
woofer’s feet. The pads also provide
a stable base for the subwoofer.
Subwoofer (SKW-338)
Subwoofer
*2
Speaker cable 3.0 m
(10 ft.)
4 floor pads
(Purple)
Speaker terminals
Pad
5.1ch Home Theater Speaker Package
HTP-338
SN 29400401
Y1001-1
(C) Copyright 2010 ONKYO CORPORATION Japan. All rights reserved.
* 2 9 4 0 0 4 0 1 *
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8023 Fax: 072-831-8163
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 800-229-1687, 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/
ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.com/
ONKYO EUROPE ELECTRONICS GmbH (UK BRANCH)
The Coach House 81A High Street, Marlow, Buckinghamshire, SL7 1AB, UK
Tel: +44-(0)1628-473-350 Fax: +44-(0)1628-401-700
ONKYO CHINA LIMITED
Unit 1 & 12, 9/F, Tower 1, Ever Gain Plaza, 88, Container Port Road, Kwai Chung,
N.T., Hong Kong. Tel: 852-2429-3118 Fax: 852-2428-9039
http://www.ch.onkyo.com/
Wall Mounting
Using the Rubber Stoppers for a More Stable Platform
Front speaker (SKF-338)
Surround speaker (SKR-338)
Center speaker (SKC-338)
Front speakers
*1
Speaker cables 3.5 m
(11 ft.)
Surround speakers
*2
Speaker cables 8.0 m
(26 ft.)
Center speaker
*1
Speaker cable 3.0 m
(10 ft.)
*1
For magnetic shielding.
*2
Non-magnetic shielding.
*3
Configuration of the rubber stoppers may be different from the figure, such as being
2 sheets instead of 1 sheet, but the total number will be same.
16 thin rubber stoppers
*3
12 thick rubber stoppers
*3
Caution
• The front grilles are not designed to be removed so do not
attempt to remove them forcibly, as this will damage
them.
To mount the front/surround speakers vertically, use the
keyhole slot shown to hang each speaker on a screw that’s
securely screwed into the wall.
To mount the center speaker horizontally, use the two key-
hole slots shown to hang each speaker on two screws that
are securely screwed into the wall.
Caution
• A mounting screw’s ability to support a
speaker depends on how well it’s
anchored to the wall. If you have hol-
low walls, screw each mounting screw
into a stud. If there are no studs, or the
walls are solid, use suitable wall
anchors. Use screws with a head diame-
ter of 9 mm (5/16") or less and a shank diameter of 4 mm
(1/8") or less. With hollow walls, use a cable/pipe detec-
tor to check for any power cables or water pipes before
making any holes.
• Leave a gap of between 5 mm (3/16") and 10 mm
(7/16") between the wall and the base of the screw head,
as shown. (We recommend that you consult a home instal-
lation professional.)
We recommend using the supplied rubber stoppers to
achieve the best possible sound from your speakers. The
rubber stoppers prevent the speakers from moving, provid-
ing a more stable platform. Use thick stoppers for the cen-
ter speaker, and thin stoppers for the other speakers.
(White)
(Red)
(Blue)
(Gray)
(Green)
Speaker terminals
Keyhole slot
SKF-338
SKR-338
Speaker terminals
Keyhole slots
SKC-338
Keyhole slot for
wall mounting
Thick rubber
stoppers
Keyhole slots for wall mounting
183 mm (7-3/16")
Thick rubber
stoppers
Wall
5 to 10 mm
(3/16" to 7/16")
Thin rubber stoppers
Bottom of the
SKR-338
Bottom of the
SKF-338
Bottom of the
SKC-338
50 mm
(1-15/16")
12 mm (1/2")
Thick rubber stoppers
