94
≫
≫
≫
≫
≫
≫
Setting Item
Default Value
Setting Details
Auto Standby
On
This setting allows the unit to enter standby mode
automatically after 20 minutes of inactivity without
any video or audio input. (When "USB Power Out
at Standby" is enabled, the unit enters the HYBRID
STANDBY mode which minimizes the increase in
power consumption.)
"On": The unit automatically enters standby mode
("AUTO STBY" lights up).
"Off": The unit does not automatically enter standby
mode.
•
"Auto Standby" is displayed on the main unit’s
display and TV screen 30 seconds before
entering standby mode.
Auto Standby in
HDMI Standby
Through
On
Enable or disable "Auto Standby" while "HDMI
Standby Through" is on.
"On": The setting is enabled.
"Off": The setting is disabled.
• This setting cannot be set to "On" if "Auto
Standby" and "HDMI Standby Through" are set
to "Off".
USB Power Out
at Standby
Off
When this function is set to "On", electricity can be
supplied to the Streaming media player connected
to the POWER OUT port even if this unit is in
standby mode.
•
The POWER OUT jack is cannot supply power to
smart phones/tablets or other devices.
•
While using this function, power consumption
increases in standby mode, however, the
increase in power consumption is minimized by
automatically entering the HYBRID STANDBY
mode where only the essential circuits are
operating.
6. Miscellaneous
1. Tuner
Change the settings for TUNER.
Setting Item
Default Value
Setting Details
FM Search Level Normal
If automatic tuning regularly stops on FM stations with weak
reception when "Normal" is selected, select "Strong" so only
those FM stations with strong reception are selected.
DAB Auto Scan
-
You can run the auto scan when new DAB stations
are added or when you move house.
DAB DRC
Off
With the DRC (Dynamic Range Control) setting, you
can reduce the dynamic range of DAB digital radio so
that you can still hear quiet parts even when listening
at low volume levels - ideal for listening to the radio
late at night when you don't want to disturb anyone.
"Off": DRC off
"Large": Large reduction in dynamic range
"Small": Small reduction in dynamic range
2. Firmware Update
Change the settings for Firmware Update.
Setting Item
Default Value
Setting Details
Version
-
The current firmware version is displayed.
Update via USB
-
Press ENTER to select when updating the firmware
via USB.
3. Initial Setup
Make the initial setup from the setup menu.
