Onkyo 247414, Instruction Manual

Page: 87 / 115

87
Front Panel ≫ Rear Panel ≫ Remote ≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
„
3. Distance
Set the distance from each speaker to the listening position.
Setting Item Default Value Setting Details
Front Left 3.60 m Specify the distance between each speaker and
the listening position.
Center 3.60 m Specify the distance between each speaker and
the listening position.
Front Right 3.60 m Specify the distance between each speaker and
the listening position.
Height Left 2.70 m Specify the distance between each speaker and
the listening position.
Height Right 2.70 m Specify the distance between each speaker and
the listening position.
Surround Right 2.10 m Specify the distance between each speaker and
the listening position.
Surr Back Right 2.10 m Specify the distance between each speaker and
the listening position.
Surr Back Left 2.10 m Specify the distance between each speaker and
the listening position.
Surround Left 2.10 m Specify the distance between each speaker and
the listening position.
Subwoofer 3.60 m Specify the distance between each speaker and
the listening position.
• The unit of distance can be changed by pressing the MODE button on the remote
controller. When using the unit "feet", the setting is available in increments of 0.1 ft from
0.1 ft to 30.0 ft. When using the unit "meter", the setting is available in increments of 0.03
m from 0.03 m to 9.00 m.
„
4. Level Calibration
Adjust the volume level of each speaker.
Setting Item Default Value Setting Details
Front Left 0 dB Select a value between "-12 dB" and "+12 dB"
(in 1 dB increments). A test tone will be output each
time you change the value. Select the desired level.
Center 0 dB Select a value between "-12 dB" and "+12 dB"
(in 1 dB increments). A test tone will be output each
time you change the value. Select the desired level.
Front Right 0 dB Select a value between "-12 dB" and "+12 dB"
(in 1 dB increments). A test tone will be output each
time you change the value. Select the desired level.
Height Left 0 dB Select a value between "-12 dB" and "+12 dB"
(in 1 dB increments). A test tone will be output each
time you change the value. Select the desired level.
Height Right 0 dB Select a value between "-12 dB" and "+12 dB"
(in 1 dB increments). A test tone will be output each
time you change the value. Select the desired level.
Surround Right 0 dB Select a value between "-12 dB" and "+12 dB"
(in 1 dB increments). A test tone will be output each
time you change the value. Select the desired level.
Surr Back Right 0 dB Select a value between "-12 dB" and "+12 dB"
(in 1 dB increments). A test tone will be output each
time you change the value. Select the desired level.
Surr Back Left 0 dB Select a value between "-12 dB" and "+12 dB"
(in 1 dB increments). A test tone will be output each
time you change the value. Select the desired level.
Surround Left 0 dB Select a value between "-12 dB" and "+12 dB"
(in 1 dB increments). A test tone will be output each
time you change the value. Select the desired level.
Subwoofer 0 dB Select a value between "-15 dB" and "+12 dB"
(in 1 dB increments). A test tone will be output each
time you change the value. Select the desired level.