31
Chapter 3:
Using Easy Print Mode
O’Neil Programming Language Reference Manual
RF Radio Power Down Timeout {CR:nn}
Original
MF2, MF3, 2t, 4t
Radio Ready
2t, 3l, 4t
{
A left bracket begins the command set.
CR:nn
This command turns off the radio if there
is no activity in
nnn
minutes; it requires
the user to turn the radio back on via
button push before communications can
resume.
nnn
in minutes
nnn = 65536: Never times out (default)
X
X
}
A right bracket ends the command set.
System Timeout (Printer Sleep Timer) {CT:nn}
Original
MF2, MF3, 2t, 4t
Radio Ready
2t, 3l, 4t
{
A left bracket begins the command set.
CT:nn
nnn
in seconds (default 10s to 60s)
nnn = 9999: Never times out.
Note:
If there is no activity
(communications or button pushes)
within the specified time, the printer will
"go to sleep" to save power. A button
push or new communications will wake
up the printer.
X
X
}
A right bracket ends the command set.
Configure Number of Data Bits {CN:n}
{
A left bracket begins the command set.
CN:n
Configures the number of data bits where
n
indicates seven or eight
data bits.
}
A right bracket ends the command set.
Configure Parity {CP:n}
{
A left bracket begins the command set.
CP:n
Configures the parity:
N = No parity
E = Even parity
O = Odd parity
}
A right bracket ends the command set.
Summary of Contents for microFlash2
Page 3: ......
