OneAccess ONE100D/M, Installation Manual

Page: 30 / 67

ONE100D/M Chapter 3
Installation Guide Router description
30
One100D/M-2B-2V-W
The following figure shows the back panel of a ONE100D/M with 2 BRI connectors for NT mode and 2
FXS voice interfaces:
Following connectors are present:
Note that an earth stud is also present on the back panel.
Connector(s) Label Type Function
SHDSL SHDSL RJ45 SHDSL line connector
Console CONSOLE RJ45 V.24 DTE interface
Ethernet ETHERNET RJ45 Ethernet LAN connector
4 port Ethernet
switch SWITCH – E0-0/0 - E3-0/3 RJ45 Ethernet LAN connectors
ISDN ISDN BRI – L0-5/0 - L1-5/1 RJ45 ISDN connection, NT mode
FXS FXS – L2-5/2 – L3-5/3 RJ45 2 analog telephone interfaces
WLAN - SMA Wireless LAN connectors
Power 12V-2,2A DC input
jack Power input
Earth stud - Clinching
stud Earth connection