6.2.6 . Get Parameter
Click “Get Para” button, parameter of the reader can be acquired. Acquire parameter
succeed if display green in status bar; Acquire parameter failure if display red in status
bar.(Do not read card when acquire parameter)
6.2.7 Set Parameter
When change parameter in demonstration area, click “Set Para” button, updated data will
be set in currently reader. Setup succeed if display green in status bar; Setup failure if
display red in status bar.
6.2.8 Default All
Click “ Default All” button, basic parameter and senior parameter will recover to default.
(Need to click “parameter setup”, updated parameter will be set in reader).
6.2.9 Net Initialize
Null
6.3.10 WIFI Initialize
Null
6.3 Senior Settings
Senior settings is mainly setup the TCP/IP reader parameter, such as IP address, Syris
config and time config etc.
TCP/IP config
: User can modify the TCP/IP uhf reader
SYRIS Config:
It is to set Syris SN and Syris ID.
Time Config:
It is to set reader time.
Soft Config:
In general can ignore the function, soft reset, is reset the device by software.
