SKU 66558
For technical questions, please call 1-800-444-3353.
Page 5
Troubleshooting
problem
possible causes
possible Solutions
Pump runs, but
will not deliver any
water.
Clogged Screen (see Pump
1.
Diagram)
The pump water height is
2.
below the minimum water
level.
Low line voltage.
3.
Remove Screen. Clean out dirt and debris
1.
from Screen and impeller. Then replace
Screen.
Fill Basin.
2.
Consult an electrician.
3.
Pump won’t start
or run.
Check power connections and
1.
circuits/fuses.
Water level too low.
2.
Screen and/or impeller
3.
clogged.
Defective pump.
4.
Consult an electrician.
1.
Fill Basin
2.
.
Remove Screen. Clean out dirt and debris
3.
from Screen and impeller. Then replace
Screen.
Have a qualified service technician repair or
4.
replace.
Excessive noise or
vibration.
Debris in impeller.
Remove Screen. Clean Rotor in clean water
with toothbrush. Then replace Screen.
Follow all safety precautions whenever diagnosing or servicing the
tool. Disconnect power supply before service.
plEASE READ THE FOllOWINg cAREFUllY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT
HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/
OR DISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN By CERTIFIED AND LICENSED TECHNICIANS, AND NOT By THE BUyER. THE
BUyER ASSUMES ALL RISK AND LIABILITy ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.
