Once AgriShift LCL-0.2-120V, Installation And User Manual

Page: 12 / 40

AgriShift
®
Lighting Control Unit MASTER - Model LCL-0.2
10
SEC
TIO
N 3
3 OPERATOR INTERFACE
3.1 CONTROL LOCATION AND UTILIZATION
LCD
Navigation
buttons
Output A
Control switch
Output B
Control switch
Manual intensity adjustment knob
(Output A and B)
Status lights
Communication
Blinks according to the flow of data exchanged over the
communication bus.
The light remains off if a loss of communication is detected,
or if the communication bus is inactive.
Warning
Alarm
Lights up in the following cases:
- Blinking: if either the manual control or simulation
option is activated.
The manual control mode is accessible through the software options
(Output Control or Temporary Override) or manually (by using the
control switches located on the front panel or an external dimmer).
- Steady: if an abnormality is detected by the controller
(e.g., low battery, memory full, history data overflow, etc.)
Non-operational
Selection or
validation
button
Menu-Back
button
3.1.1 Status Lights