www.onbonbx.com
第 12 页
LED
Setting
Total width, total heightOUT1-OUT2: horizontal width,
vertical height, horizontal start, vertical start
Image
quality
Brightness,contrast,saturation,sharpness,color temperature
and dynamic contrast.
Crop
Switch, crop width, crop height, crop horizontal start, crop
vertical start
Save
mode
Mode 1-Mode 8
Load
mode
Mode 1-Mode 8
Option
Input EDID (horizontal width,vertical width,refresh rate) Input
hot spare (close, backup for input source)
VGA setting (adjust automatically,horizontal start,vertical
start) Planned tax(tax 1, tax 2...)
Other setting(switch stunt, voice setting) Testing
photo(close, photo 1 to photo 8)
key lock(open, close)
Factory reset(ADC calibration,languages,factory
reset,firmware version)
Splice mode
The system provides two splicing methods for users to choose. As
mentioned above, you need to select the “splicing method” according to the
LED screen width and height ratio and the use scenario. "
It is more suitable; when the shape of the LED screen is a long screen,
it is more appropriate to choose "horizontal stitching". When selecting the
splicing method, you should also pay attention to whether the "LED screen
can set the maximum number of points" displayed in the prompt
information bar meets the actual LED screen width and height
requirements.
After clicking the
【
OK
】
button, it will be confirmed. At this time, the
system will automatically jump to the “LED screen parameter” setting
menu.
Horizontal splice
In the non-menu state, click the [OK] button to enter the main menu,
