MY950
Mic / Antenna Bar
Assembly Instructions:
(1) threaded insert
(2) security lugs
If any parts are missing, please contact On-Stage customer service.
Components Included:
(1) center bracket with 5/8”-27
female threading
1.
With the mic bar track facing up, slide the
threaded insert into the end of one of the mic
bars until two of the insert’s holes are inside the
bar, leaving the other two holes exposed.
2.
With the socket of the center bracket facing
down, slide the center bracket over the threaded
insert and mic bar.
(2) 24” mic bars
(1) speaker stand adapter
(2) center bracket mounting lugs with
5/8"-27 male threading
(4) multi-position mounting lugs with
5/8"-27 male threading
3.
Slide the second mic bar into the opposite end of
the center bracket so the threaded insert slides into
the end of the mic bar as in step 1. Push the two mic
bars together until they meet in the center. Align the
four holes of the threaded insert with the four holes
of the center bracket.
