ON Semiconductor MT9M021IA3XTMH-GEVB, User Manual

Page: 3 / 5

MT9M021IA3XTMH − GEVB
www.onsemi.com
3
Jumper Pin Locations
The jumpers on headboards start with Pin 1 on the leftmost
side of the pin. Grouped jumpers increase in pin size with
each jumper added.
Figure 5. Pin Locations for a Single Jumper.
Pin 1 is Located at the Leftmost Side and Increases as it Moves to the Right
Pin 1 Pins 1 − 4
Figure 6. Pin Locations and Assignments of Grouped Jumpers.
Pin 1 is Located at the Top-Left Corner and Increases in a Zigzag Fashion Shown in the Picture
Pins 1 and 2
Pins 9 and 10
Pins 7 and 8
Pins 5 and 6
Pins 3 and 4
Pin 1
Figure 7. EEPROM Switch Locations in their Default Positions. The First Switch (A2) is Set to ON,
while the Second Switch (A1) of SW6 is Set to OFF.
A1
A2
Jumper/Header Functions & Default Positions
Table 1. JUMPERS AND HEADERS
Jumper/Header No. Jumper/Header Name Pins Description
P1 +VPP Open (Default) For connection to exVPP power supply for OTPM
P4 +VDDIO 2 − 3 (Default) Connects to on-board +VDDIO power supply
1 − 2 External power supply connection
P5 +1V8_VDD 2 − 3 (Default) Connects to on-board +1V8_VDD power supply
1 − 2 External power supply connection
P6 +2V8_VAA 1 − 2 (Default) Connection to on-board +2V8_VAA power supply
2 − 3 External power supply connection
P7 +2V8_VDDPLL 2 − 3 (Default) Connects to on-board +2V8_VDDPLL power supply
1 − 2 External power supply connection
P9 +0V4_VDD_SLVS 2 − 3 (Default) Connects to on-board +0V4_VDD_SLVS power supply
1 − 2 External power supply connection