AR1337CSSC32SMFAH3
−
GEVB
3
Jumper Pin Locations
The jumpers on headboards start with Pin 1 on the
leftmost side of the pin. Grouped jumpers increase in pin
size with each jumper added.
Figure 5. Pin Locations for a Single Jumper. Pin 1 is Located at the Leftmost Side
and Increases as it Moves to the Right
Pins 1
−
4
Pin 1
Figure 6. Pin Locations and Assignments of Grouped Jumpers.
Pin 1 is Located at the Top-Left Corner and Increases in a Zigzag Fashion Shown in the Picture
Pins 1 and 2
Pin 1
Pins 3 and 4
Pins 5 and 6
Pins 7 and 8
Pins 9 and 10
Jumper/Header Functions & Default Positions
Table 1. JUMPERS AND HEADERS
Jumper/Header No.
Jumper/Header Name
Pins
Description
P1
+VPP1
Open (Default)
Connection to ExVPP Power Supply (for OTPM)
P3
TEST
2
−
3 (Default)
Set to Normal Mode
1
−
2
Set to Test Mode
P4
ATEST1
1
−
2 (Default)
Normal Operation
2
−
3
Test Operation
P5
FLASH
1
+5V0
2
GND
3
FLASH
4
+3V3
P6
GPI2
1
−
2 (Default)
SADDR Operation
Open
Trigger Signal for Slave Mode
P7
SHUTTER
Open (Default)
For Connection to External Shutter
P8
GPI3
2
−
3 (Default)
Normal Operation/Master in Multi-camera Mode
Open
Slave in Multi-camera Mode
P16
ON_LED
1
−
2 (Default)
Connects to On-board LED to Indicate “Power On”
P18
XSHUTDOWN
1
−
2 (Default)
Shutdown Independent Control
P21
ATEST2
1
−
2 (Default)
Normal Operation
2
−
3
Test Operation
