ON Semiconductor AP0100AT, User Manual

Page: 4 / 7

AP0100AT2L00XUGAH − GEVB
CONFIDENTIAL AND PROPRIETARY
NOT FOR PUBLIC RELEASE
www.onsemi.com
4
Table 1. JUMPERS AND HEADERS
(continued)
Jumper/Header No. Description Pins Jumper/Header Name
P11 ON_LED 1 − 2 (Default) Connects to On-Board to Indicate Power On
P12 +HVDDIO
1 − 2 (Default) Connects to On-Board +HVDDIO Power Supply
2 − 3 External Power Supply Connection
P14 +VCC
1 − 2 (Default) Connects to On-Board +VCC Power Supply
2 − 3 External Power Supply Connection
P15 +5V0 1 − 2 (Default) USB +5V0_BUS Power Supply Connection
2 − 3 Connects to On-Board +5V0_EXT Power Supply
P16 MCLK_IN
1 − 2 (Default) Connects to On-Board Oscillator
2 − 3 Connects to XMCLK (i.e. Clock Signal from Demo2
Baseboard)
P17 GPIO1_LED Open (Default) Off Frame LED
Closed On Frame LED
P19 +AVDD
Closed (Default) Connects to On-Board Reg1V8, Internal
Regulator Use
Open Disconnects from On-Board Reg1V8, External
Regulator Use
P20 +2V8_VDDPHY
1 − 2 (Default) Connects to On-Board +2V8_VDDPHY Power Supply
2 − 3 External Power Supply Connection
P21 +3V3_VDDADAC
1 − 2 (Default) Connects to On-Board +3V3_VDDADAC Power Supply
2 − 3 External Power Supply Connection
P22, P23 Oscillator/Xtal
Selection
P22 1 − 2,
P23 Open (Default)
Selects Oscillator as AP0100 Input Clock
P22 2 − 3,
P23 Closed
Selects Crystal as AP0100 Input Clock
P24 EXT_REG 1 − 2 (Default) Internal Regulator
2 − 3 External Regulator
P26 VDD
1 − 2 (Default) Internal Reg1V2_VDD
2 − 3 External On-Board Regulator U2 Set +1V2
P28 UART Transceiver
Open (Default) Turn Off UART Transceiver
Closed Turn On UART Transceiver
P30 SEN_CLK Open (Default) Beagle Serial No Access to Demo 2
×
& Sensor
1 − 2 Beagle Serial Access to Demo 2 × & Sensor
P31 SEN_DATA
Open (Default) Beagle Serial No Access to Demo 2 × & Sensor
1 − 2 Beagle Serial Access to Demo 2 × & Sensor
P32 ENLDO
1 − 2 (Default) Enable Internal Regulator
2 − 3 Disable Internal Regulator
P33 GPIO1_LED 1 − 2 Set to GPI
2 − 3 Set to GPO
P34 GPIO_4
Open (Default) Serial IO Expander Control
1 − 2 Set to Normal
2 − 3 Set to Horizontal Mirror
P35 GPIO_3
Open (Default) Serial IO Expander Control
1 − 2 Set to NTSC
2 − 3 Set to PAL
P36 GPIO_2
Open (Default) Serial IO Expander Control
1 − 2 Set to No Pedestal
2 − 3 Set to Pedestal
P37 GPIO_DATA16
1 − 2 (Default) Auto-Configuration Access
Open JTAG/UART Access
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.