©
Semiconductor Components Industries, LLC, 2014
April, 2014
−
Rev. 1
1
Publication Order Number:
EVBUM2227/D
25VT6A5VGEVB
25VT6A5VGEVB Evaluation
Board User'sManual
Description
The 25VT6A5VGEVB evaluation board is designed such
that it can accommodate a 1x1 to a 2x2 combination of
MOSFETs, for
m
8
−
FL and SO8
−
FL packages. Depending
on the type of application and necessity, any combination of
the above packages can be used. The 25VT6A5VGEVB
evaluation board is designed to operate with an input voltage
ranging from 8 V to 16 V, and to provide an output voltage
of 0.8 V to 1.8 V for load currents of up to 25 A. The
25VT6A5VGEVB comes with a 5 V driver. The
25VT6A5VGEVB evaluation board has a number of test
points that can be used to evaluate its performance in any
given application.
Features
•
8 V to 16 V Input Voltage
•
25 A of Steady State Load Current
•
500 kHz
Switching Frequency
•
Access to IC Features such as Enable, Switching Node
and VID Settings for Output Voltage
•
Convenient Test Points for Simple, Non
−
invasive
Measurements of Converter Performance Including
Input Ripple, Output Ripple, High Side and Low Side
Gate Signals and Switching Node
Applications
•
Synchronous Buck Converters
♦
High Frequency Applications
♦
High Current Applications
♦
Low Duty Cycle Applications
•
Multi
−
phase Synchronous Buck Converters
♦
Evaluation Board has only One Phase Implemented
Figure 1. 25VT6A5VGEVB Evaluation Board
http://onsemi.com
EVAL BOARD USER’S MANUAL
