manualshive.com logo in svg

ON Semiconductor 180-6981, Quick Start Manual, Page: 12 / 20

Share
Download
ON Semiconductor 180-6981 Quick Start Manual Download Page 12

LV8702VSLDGEVK

www.onsemi.com

12

How to Use the GUI Log

The log screen in the GUI shows the serial data sent to

Arduino to control its API functions.

i. Set Step Angle

ii. Start Motor 
Rotation
Executed

iii. Stop Motor 
Rotation
Executed

iv. Free Motor 
Rotation
Executed

19

20

21

i. Set Step Angle
Executed

ii. Start Motor Rotation

iii. Stop Motor Rotation

iv. Free Motor Rotation

19. Saving the GUI Log

By pressing the “SAVE” button, the content
displayed on the work log can be saved as a .txt
file or a .csv file.

20. Clear GUI Log

By pressing the “CLEAR” button, the content
displayed on the work log will be erased.

21. Program Generation

Pressing the “Generate Program” will output the
executed API functions on the work log into a .ino
program file that can be uploaded directly with
Arduino. By writing the output of the .ino file to
Arduino, motor control can be executed
automatically through standalone operation
according to the procedure generated through the
GUI Log.
For more details regarding the Arduino program
generation function, refer to the attached Appendix
under 

21 Arduino Program Automatic Generation

.

Summary of Contents for 180-6981





















Reviews:

No comments