OMS KEA 300 TGI, Use And Maintenance Manual

Page: 27 / 36

27
6.2.2 CLEANING THE BLADE, THE BLADE GUARD AND THE RING
Loosen the blade guard rod knob (1)
so as to allow extraction of the blade
guard (2)
Pass a damp cloth in the space
between the blade and the blade
guard ring. Rotate it for one turn
together with the blade.
Figure 16 - Detaching the blade
guard
Figure 17 - Cleaning the blade
with the cloth
CAUTION!: This operation must be performed with the utmost
attention and concentration, as there is a risk of being cut. To this
end, it is advisable to use appropriate protective gloves.
In order to clean the surface opposite the blade and the ring, it is necessary
to remove the slicing machine blade.
Caution! This procedure is only
recommended if in possession of the plexiglass blade extractor. The
procedure for extracting the blade is as follows (see Fig. 18):