OMS KEA 300 TGI, Use And Maintenance Manual

Page: 20 / 36

20
4.4 GENERAL OPERATION CONTROL
Before testing, make sure that the tray is fully locked, then try operation,
proceeding as follows:
1. turn the ON/OFF switch to “ON” (Fig. 1)
2. press the start blade button (Fig. 8) and check that the blade is moving.
Press the stop blade button and check that the blade comes to a halt;
CHAPTER 5 USING THE MACHINE
5.1 CONTROLS
Figure 8- Location of the controls
1 Carriage run selector 6/b Stop carriage
2 Manual/auto slice counter selector 7/b Slice no. setting keys
3 Slice counter display
8 Selector: A manual
4 Start blade B automatic
5 Start carriage
6/a Stop blade