![background image](http://html.mh-extra.com/html/omron/zx2-ld100/zx2-ld100_user-manual_1633410084.webp)
Selecting the Initial Sub-Display
84
ZX2 User’s Manual
INTRODUCTION
MAIN
APPLICATIONS
& SETTING
METHODS
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
DETAILED
SETTINGS
FLOW OF
OPERATION
CONTENTS
PREPARATION
FOR
MEASUREMENT
BASIC
SETUP
TROUBLE-
SHOOTING
Height
Double
Sheet
Detection
Positioning
Eccentricity
and Surface
Deflection
Steps
and
Warpage
Thickness
Selecting the Initial Sub-Display
Initial sub-display:
The initial sub-display is the display that appears when the power is turned on.
Procedure for setting up initial sub-display
1
Set to the MENU mode
2
Sub-display memory setting
Button
Operation
Display
Description of Operation
Explanation of
Selection Menu
Hold down the
button for
three seconds to switch to the
MENU mode.
Button
Operation
Display
Description of Operation
Explanation of
Selection Menu
Press the button to display
.
Select the
desired value.
Press the button to select the
sub-display memory.
HIGH threshold
LOW threshold
Analog output value
Resolution
Current value
BANK
Sub-display memory setting
2
Return to RUN mode
3
Set to the MENU mode
1
Setting completed
Hold down for
3 seconds
Lit
Press to display
.
Default value: HIGH
Press to select
Setting channels used when connecting multiple units: Each CH