![background image](http://html.mh-extra.com/html/omron/zx-cal/zx-cal_operation-manuals_1633394159.webp)
FUN (Function) Mode
Section 4-5
139
4-5-13 Auto-scale Settings
The auto-scale setting procedure is shown in the following figure. This
function can be set only for a Through-beam Sensor.
No. of samples
to average
Scaling function
Auto-scale
Go to the
next mode.
Press the ENT Key to
complete the auto-scale
setting.
Move to the scaling function
selection mode.
Z157-E1-01C.book Page 139 Thursday, August 31, 2006 5:13 PM