Omron ZW-C1*AT, User Manual, Page: 77 / 450

Setting Sensing ZW User's Manual
75
4
Settings for
Func
tion
Setting the Material of the Target to Measure
Setting the material of the target to measure.

Explorer pane : [Bank] | [(Bank data name)] (double-click)

Edit pane : [Sensing setting] icon ( )

Sensing settings window : [Operating mode]
Refer to p.362 for the linearity data of various materials according to each material setting.
Item Setting item Setting value Description
Operation mode Material Normal (default value) A measurement can be performed at specific linearity
regardless of the type of target to measure.
Usually, select this setting.
Mirror Select this mode when specular reflection (regular
reflection) occurs on the surface. (Glass, wafer, lustrous
metal, etc.)
Rough Select this mode when diffuse reflection occurs on the
surface.
1
Select the material of the target to measure
at [Material].
The material of the target to measure can also be set by the operating keys on the Sensor Controller.
Setting the Material of the Target to Measure p.302
Important
Note