Omron ZW-C1*AT, User Manual, Page: 151 / 450

Parallel I/O connection ZW User's Manual
149
6
Commun
ication
s with Exte
rnal De
vi
ces
Setting the Clamp Value
Set the clamp value to output when "Clamp" is selected as processing when measurement is not possible.

Explorer pane : [Bank] | [(Bank Data Name)] (double click)

Edit pane : [I/O Settings] icon ( )

I/O Setting Screen : [Analog output]
2
Select the operation during non-
measurement at [Non-Measurement
Setting].
The operations for when measurement is not possible can also be set with key operations on the Sensor Controller.
Setting operation when measurement is not possible p.344
Item Setting item Setting value Description
Analog output Clamp output When the analog output destination is set to current
MIN (approx. 3.4mA)/4 to 20mA (1mA increments)/
MAX (default value: approx. 21mA)
When the analog output destination is set to voltage
MIN (approx. -10.8V)/-10 to 10V (1V increments)/
MAX (default value: approx. 10.8V)
Select the current/voltage at clamp
output.
1
Set the operating mode to the FUN mode.
3-3 Switching operation modes p.61
2
Select the output value at [Output value
when clamp].
Note