Omron ZW-C1*AT, User Manual

Page: 150 / 450

Parallel I/O connection
148
ZW User's Manual
Settings for Processing When Measurement Is Not Possible
Setting operation when measurement is not possible
Set the output method when the sensor head temporarily enters a non-measurement state, for example, due to
insufficient received light amount or a RESET input state.
Example: When skipping occurs in the waveform due to insufficient received light intensity
When performing hold measurement, the output before the initial hold value is applied is the same as that for "Clamp"
even if "Keep" is set.

Explorer pane : [Bank] | [(Bank Data Name)] (double click)

Edit pane : [I/O Settings] icon ( )

I/O Setting Screen : [Non-Measurement Setting]
Item Setting item Setting value Description
Non-Measure-
ment setting Non-
Measurement
setting Keep The measured value before the non-measurement state
was entered is held and output.
Clamp With analog output, the preset clamp value (abnormal
value) is output. All judgment outputs become OFF.
1
Set the operating mode to the FUN mode.
3-3 Switching operation modes p.61
(1)
(1)
(2)
(2)
(3)
(3)
Direction of
w orkpiece
mo v ement
Amo u nt of displacement
Amo u nt of displacement
State w ith w a v eform skip ca u sed
b y ins u fficient light amo u nt
As the v al u e b efore the skip occ u rred is kept,
this is effecti v e in canceling w a v eform skip.
W hen [Keep] is selected
Important