Omron ZR-RX70, User Manual

Page: 81 / 127

Setting Menus
ZR-RX70 User’s Manual
3
SETTINGS AN
D
MEASUREMENT
79
(5)-12 Game
Games are available. The score is stored for each user.
(5)-13 Information
Displays system information for the ZR-RX70.
Network Time Settings
The ZR-RX70 synchronizes the time of the built-in clock with that of a time server via an Ethernet.
The synchronization is not performed if the error with the time server is 500 ms or more.
The synchronization accuracy with the time server is approx. 10ms. (It may exceed 10ms in some network environ-
ments.)
Setting Description
Network Time Enables or disables this feature.
Off: Disables this feature. The time adjustment is not performed.
On: Enables this feature. The time adjustment is performed.
Time Server Specifies the domain name of the time server to be used.
Time Zone Sets the time zone of the area in which the ZR-RX70 is to be used (Japan: +09:00).
Synchronized Time Sets the time at which the ZR-RX70 clock is to be synchronized with the time server.
When the setting time comes, the synchronization operation in the local country is per-
formed with a method specified in Synchronization Mode.
Synchronization Mode Immediately, Gradually
Sets a method in which the clock is to be synchronized with the time server.
Immediately: Immediately synchronizes the clock with the time server when the time for
synchronization comes.
Gradually : Does not immediately synchronize the clock when the time for synchroni-
zation comes.
Gradually synchronizes the clock with the time server.
The adjusted length of time is about 43 seconds per day (approximately
equal to 10 ms per 20 seconds).
Connection Test Performs a connection test by connecting to the time server.
After the connection test is performed, a message is displayed.
If connection fails, check the settings and conduct the connection test again.
If the connection test is a success, the following message is displayed.
Important