Omron ZR-RX70, User Manual

Page: 62 / 127

Setting Menus
60
ZR-RX70 User’s Manual
(1)-3 Filter
Specifies the filter setting. Use the filter when there is noise in the input.
The filter is a low-pass filter.
(1)-4 EU (Scaling)
Converts the measured signals to other units.
Selection Description
Off The filter is disabled.
Line The cutoff frequency is 1.5 Hz.
5Hz The cutoff frequency is 5 Hz.
50Hz The cutoff frequency is 50 Hz.
500Hz The cutoff frequency is 500 Hz.
Setting Description
(1) Function Sets the function to ON or OFF.
(2) Meas. Value
(Upper and Lower Limits)
Sets the upper and lower limits of the numeric value to be converted.
(3) EU Output Value
(Upper and Lower Limits)
Sets the upper and lower limits of the output value after conversion.
(4) Dec pt Specifies the decimal point position of the EU output value(s).
(5) Select Selects the specific type of engineering units (The following selections are available).
Current, length, area, volume, speed, acceleration, frequency, weight, power,
pressure, flow, temperature
(6) Unit Selects the converted unit.
The units displayed in this item are those of the type selected in “Select.”
To set a unit not displayed in this item, define an arbitrary character string in
“User-Defined Unit.” The setting made in this item is displayed in “User-Defined Unit”.
(7) User-Defined Unit Selects the converted unit, which can be specified as a user-defined character string
consisting of alphanumerics.
For details on text input, see p.88.
The settings made in “Select” and “Unit” are reflected here.