![background image](http://html.mh-extra.com/html/omron/zj-sd-series/zj-sd-series_user-manual_1633371094.webp)
80
S
e
ct
ion 5
DETAILE
D
S
E
TTINGS
ZJ-SD
User’s Manual
Section 5
Setting Judgment Output Timing (Timer)
The following description uses the OFF-delay timer as an example. Change the values in this
example if other timers are used.
Moving to the FUN mode and TIMER
1.
Set the mode switch to FUN.
2.
Use the LEFT and RIGHT keys to display
[TIMER] on the main display.
Selecting the type of timer
3.
Press the UP or DOWN key.
The sub-display flashes.
4.
Use the UP or DOWN key to select the
desired timer type.
1-Sht
(One-shot timer)
When the judgment result changes
from HIGH to PASS or from LOW to
PASS, the PASS output turns ON with
a pulse width equivalent to the time
set to the timer.
Neither the HIGH nor the LOW output
is output.
Selection
Details
ON
OFF
ON
OFF
ON
OFF
Timer time
Measured value
HIGH threshold
LOW threshold
HIGH output
PASS output
LOW output
operation2.book Page 80 Wednesday, November 29, 2006 2:56 PM