50
Sec
tio
n 4
MAIN
APP
L
ICATIONS
AND
SE
TT
IN
G ME
THO
D
S
ZJ-SD
User’s Manual
Section 4
Measuring Sheet Workpieces
Setting Tolerance Judgment Values
Refer to the HIGH threshold registered in step
and set the upper and lower limits
(HIGH and LOW thresholds) for a PASS (OK) judgment.
The judgment result will be output based on the threshold value set here.
Output type = standard: "HIGH" "PASS" "LOW"
Output type = warning: "WARN" "OK" "NG"
(*)The level is judged by absolute values as plus and minus warning levels exist.
Setting the Warning Level (Output type) p.82
Refer to "Section 5 DETAILED SETTINGS" for details on operation.
Inputting Threshold Values Directly p.65
Measurement result
Judgment result
Measurement result > HIGH threshold
HIGH
LOW threshold
≤
Measurement result
≤
HIGH threshold
PASS
LOW threshold > Measurement result
LOW
|Measurement result| > warning level (*)
WARN
LOW threshold
≤
measurement result
≤
HIGH threshold
OK
Measurement result > HIGH threshold
Or
LOW threshold > Measurement result
NG
6
operation2.book Page 50 Wednesday, November 29, 2006 2:56 PM