![background image](http://html.mh-extra.com/html/omron/zj-sd-series/zj-sd-series_user-manual_1633371020.webp)
6
S
ect
io
n
2
P
R
E
P
ARA
T
IO
N
FO
R
ME
ASUR
EM
ENT
ZJ-SD
User’s Manual
Section 2
Basic Configuration
Basic Configuration
The basic configuration of the ZJ-SD series of static electricity sensors is shown below.
Use the Sensor Unit and Amplifier Unit in the pre-determined combinations. ZJ-SD Sensor Units and
Amplifier Units cannot be used in combination with ZX series Sensor Units and Amplifier Units.
Interface Unit
ZJ-SDA
Smart Static Electricity
Monitoring
Personal Computer
Connecting cable
Sensor Head
Extension Cable
Calculating Unit
Amplifier Unit
Power Supply
Enables operation
of Amplifier Units
from the personal
computer and
monitoring
measured values.
Used to connect to
a personal computer
or programmable
controller.
ZJ-SD100
Detects static
electricity.
Basic Configuration
ZJ-SDA11
Performs measurements
and outputs measurement
results.
DC24V (±10%)
ZX-XC1A (1 m)
ZX-XC4A (4 m)
ZX-XC8A (8 m)
To be used between
a Sensor Unit and
Amplifier Unit.
Only one extension
cable can be used.
ZX-CAL2
Used to connect two or
more Amplifier Units.
•
Calculating
Commercially
available cross cable
operation2.book Page 6 Wednesday, November 29, 2006 2:56 PM