![background image](http://html.mh-extra.com/html/omron/zj-sd-series/zj-sd-series_user-manual_1633371111.webp)
97
ZJ-SD
User’s Manual
S
ect
io
n
6
AU
XILIAR
Y FUNC
T
IO
N
S
Section 6
Initializing Setting Data
Initializing Setting Data
Initialization resets the settings of all banks or the currently selected bank to their default
values.
• There are two [INIT] options, [ALL] and [NOW].
[ALL]: This initializes all banks (0 to 3).
[NOW]: This initializes the currently selected bank.
• After bank(s) are initialized, the currently selected bank never switches to bank 0.
Default Value
Function
Default Value
Measurement mode
Standard
Number of samples to
average
When connected to the static electricity sensor head (ZJ-SD100): 64 times
Hysteresis width
0.1 kV
Distance measurement mode User
Sensor distance value
10 mm
Area correction
OFF
Hold
OFF
Timer
OFF
Special function
CLOSE
Scaling
OFF
Monitor focus
Minimum value inside rated measuring range: -4 V (at voltage output),
4 mA (at current output)
Maximum value inside rated measuring range:+4 V (at voltage output),
20 mA (at current output)
Linear output correction
No correction
Display reverse
OFF
ECO display function
OFF
Display digit limit
5 digits (all)
Non-measurement settings
KEEP
Zero reset memory
ON
HIGH threshold
Maximum display value
LOW threshold
Minimum display value
Differentiation function
OFF
Zero reset function
Canceled
Sub-display
Threshold
Output type
Standard
Warning level
Maximum display value
operation2.book Page 97 Wednesday, November 29, 2006 2:56 PM