Omron ZG2-DSU, User Manual

Page: 25 / 91

Initializing Controller Settings
23
ZG2-DSU User’s Manual
1
BEFORE USE
Initializing Controller Settings
The settings of all banks and logging data are initialized regardless of the currently saved bank
No. and logging data. To save settings and data, back them up to a personal computer before
performing initialization.
Acquiring setup data <DATAGET command> p.66
1
Switch to the FUN mode.
2
Select [SYSTEM].
3
Select [INIT].
The confirmation message is
displayed.
4
Select [OK].
The final confirmation message is
displayed.
5
Select [OK].
The settings are initialized, and the
"INITIALIZE Executed" message is
displayed.
Important
TEACH
RUN FUN
3 BANK
2 I/O SET 1 SOURCE
4 SYSTEM
3 INIT
2 SAVE
1 EJECT
4 INFO
1 OK
Initialize?
2 CANCEL
1 OK
Is it all right?
2 CANCEL
INITIALIZE Executed