![background image](http://html1.mh-extra.com/html/omron/ws02-cfsc1-e/ws02-cfsc1-e_operation-manual_744143057.webp)
42
Overview
Section 4-1
4-1
Overview
This section describes how to debug a program using the Timing Chart Win-
dow.
The debugging process starts with assigning input values to tags in the timing
chart, executing the logic program, then displaying the output results.
Pulses can be specified in terms of the device cycle time when using the Tim-
ing Chart Window. This makes it possible to run simulations for inputs that
fluctuate quickly, which is not possible when debugging with the logic window.
Note
Debugging cannot be performed simultaneously using both the Timing Chart
Window and the Logic Window.
Summary of Contents for WS02-CFSC1-E
