Omron WS02-CFSC1-E, Operation Manual

Page: 46 / 87

31
Starting and Stopping the Logic Program Section 3-2
3-2 Starting and Stopping the Logic Program
This section describes how to start and stop a logic program.
3-2-1 Starting
To start a logic program when it is stopped or paused, select Debug - Start .
Alternatively, click the Icon on the tool bar.
The logic program will begin execution. Input tags can be modified and the
corresponding outputs verified while in this state.
3-2-2 Stopping
To stop a logic program when it is being executed or when it is paused, select
Debug - Stop . Alternatively, click the Icon on the tool bar.
The logic program will stop. When the program is stopped, it will be reset and
all input and output tags will return to their initial values.
3-2-3 Pausing
To pause execution of a logic program while it is being executed, select
Debug - Pause . Alternatively, click the Icon on the tool bar.
Execution of the logic program will pause.
3-2-4 Executing One Cycle
To execute one cycle of the logic program when it is stopped or paused, select
Debug - 1 Cycle Execute . Alternatively, click the Icon on the tool bar.
The logic program will be executed for one cycle and then pause.