22
Using the Watch Window
Section 2-13
2-13 Using the Watch Window
This section describes how to use the Watch Window.
2-13-1 What Is the Watch Window?
The Watch Window can list in one window many tags and function block out-
puts that are located on different pages. Input tag values can be modified from
this window when debugging with the Logic Window,
In the Watch Window there are four tab pages, from Watch 1 to Watch 4. You
can group tags and function block outputs that you want to view together on a
tab page for easy viewing.
The items that are displayed in the Watch Window are listed below.
2-13-2 Displaying/Hiding the Watch Window
To display the Watch Window, select
View
-
Windows
-
Watch
from the Sys-
tem Menus. Alternatively, click the
Icon on the General Tool Bar
To hide the Watch Window, follow the same steps as displaying the window.
Select
View
-
Windows
-
Watch
. Alternatively, click the
Icon on the Gen-
eral Tool Bar or click the
Close
Button in the Watch Window.
2-13-3 Adding Tags to the Watch Window
Tags can be added to the Watch Window in the following ways.
Note
A maximum of 100 tags that can be added to one tab page of the Watch Win-
dow. The same tag can be added more than once.
Adding from a Tag
List
1,2,3...
1.
Click a Watch Window Tab (Watch 1 to Watch 4) to select it.
Item
Content
Name
Displays tag name or function block output name.
Value
Displays tag value or function block output value as either ON
or OFF.
Type
Displays tag or function block output type.
Comment
Displays the function block name for a function block output
Summary of Contents for WS02-CFSC1-E
