Omron WS02-CFSC1-E, Operation Manual

Page: 17 / 87

2
The NE1A Logic Simulator Section 1-1
1-1 The NE1A Logic Simulator
The NE1A Logic Simulator provides an offline debugging environment on a
computer by simulating the safety logic operation of an NE1A-series Safety
Network Controller using only software. The NE1A Logic Simulator operates
on Windows 2000 or XP. Logic programs created with the Network Configura-
tor (WS02-CFSC1-E) are loaded as files, and then the virtual safety logic
engine is started.
Note (1) When a logic program that has been created with the Network Configu-
rator is exported from the Network Configurator, a simulation file (*.smr
file) will be created.
The simulation file will be loaded into the NE1A Logic Simulator and sim-
ulation will begin.
(2) Safety logic programs can be simulated only for one NE1A-series Con-
troller at a time. Multiple Controllers connected to the same network can-
not be linked for simulations.
NE1A Logic Simulator
Hard Disk
*.smr
File
Network Configurator