Omron V780 Series, User Manual

Page: 303 / 398

8 - 13
8 Browser Interface
UHF RFID System V780-series Reader/Writer User’s Manual (Z389)
8-2
Op
eratio
n In
terface
8
8-2
-5 Device Settings
Click the Device settings Button and then click the LED custom settings Tab.
A tab page to customize the operation indicators on the Reader/Writer will be displayed. You can edit
the settings.
For details on custom settings for operation indicators, refer to 6-4-4 Device Settings on page 6-30.
Precautions for Correct Use
• If you change any of the device settings, restart the Reader/Writer. The settings will be
applied after the Reader/Writer is restarted.
• If you change the settings while the Reader/Writer is performing RF Tag communications,
noise measurement, or other processing, an error message will be displayed. Change the
settings when the Reader/Writer is in idle state.
8-2-5 Device Settings
Operation Indicator Custom Settings
Item name Description Default
Command normal
(NORMAL) Select the color for the indicators to light when processing a communi-
cations command or another command from the host device is com-
pleted normally.
Setting range: Red, Green, Blue, Yellow, Cyan, Magenta, White, or OFF Green
Command error
(ERROR) Select the color for the indicators to light when processing a communi-
cations command or another command from the host device ends in an
error.
Setting range: Red, Green, Blue, Yellow, Cyan, Magenta, White, or OFF Red
Unstable communi-
cations (WARNING) Select the color for the indicators to light when an unstable communica-
tion is detected while communications diagnosis is enabled.
Setting range: Red, Green, Blue, Yellow, Cyan, Magenta, White, or OFF Yellow
Click this button to set the
displayed values.