![background image](http://html.mh-extra.com/html/omron/v680s-series/v680s-series_user-manual_743116097.webp)
95
RFID System
User's Manual
(Modbus TCP)
Se
ct
io
n 5
Set
ting
Communic
a
tion
s
Co
nditions
Section 5
Preparations for Communications
Setting Communications Conditions
Preparations for Work
1.
Network Configuration
The network configuration that is described in this manual is shown in the following figure.
Connect the Reader/Writer and the computer with an Ethernet Cable.
2.
Set the IP address on the computer.
Set the IP addresses on the computer.
The default IP addresses of the Reader/Writer are given in the following table. Use these addresses to set the IP address on the
computer.
This example changes the last part of the IP address to a value other than 200 (i.e., to 1 to 199 or 201 to 254). Values of 0 and
255 cannot be used.
Default TCP/IP Network Settings in the Reader/Writer
IP address
192.168.1.200
Subnet mask
255.255.255.0
Default gateway
192.168.1.254
Port number
502
Port number for Web browser
7090
Reader/Writer
Ethernet Cable
Switching Hub
Computer
Ethernet Cable