Omron V680 Series, User Manual

Page: 59 / 158

57
RFID System
User's Manual
Section 3
V60
0
and
V6
80 Command
Compa
ri
s
on
Section 3
Commands
V600 and V680 Command Comparison
The V680-series Hand-held Reader/Writer can use commands in either the V600 command format or the
V680 command format. By using V600 commands, production lines that previously used a V600-series
Reader/Writer can use the same application with the V680-series Hand-held Reader/Writer. New functionality
can be used by using V680 commands.
The PARAMETER SET (SP) command is used to switch between the two command formats. V680 and V600
commands are handled as shown in the following tables.
Communications Commands
Communications Subcommands
Controller Control Commands
V680 commands V600 commands
Command name
Command
code
Communications
specification
Data
specifica-
tion
Command name
Command
code
Data
specifica-
tion
READ
RD
ST A/H READ RD A/H
SA A/H AUTO READ AR A/H
BT A/H BUTTON READ BR A/H
BA A/H BUTTON AUTO READ UR A/H
WRITE
WT
ST A/H WRITE WT A/H
SA A/H AUTO WRITE AW A/H
BT A/H BUTTON WRITE BW A/H
BA A/H BUTTON AUTO WRITE UW A/H
DATA FILL
DF
ST A/H DATA FILL FL A/H
SA A/H AUTO DATA FILL AF A/H
DATA CHECK MD ST C/K DATA CHECK MD C/K
OVERWRITE COUNT CONTROL MD ST S/L OVERWRITE COUNT CONTROL MD S
CALCULATION WRITE --- --- --- CALCULATION WRITE CW A/S
ID CODE READ ID ST H ID CODE READ ID H
READ WITH ERROR CORRECTION QR ST A/H --- --- ---
WRITE WITH ERROR CORRECTION QW ST A/H --- --- ---
V680 commands V600 commands
Command name
Command
code
Data
specifi-
cation
Command name
Command
code
Data
specifi-
cation
COMMAND PROCESSING TERMINATE AA --- COMMAND PROCESSING TERMINATE AA ---
ABORT (reset) XZ --- ABORT (reset) XZ ---
V680 commands V600 commands
Command name
Command
code
Command name
Command
code
COMMUNICATIONS CONDITIONS SETTING TR COMMUNICATIONS CONDITIONS SETTING TR
BASIC FUNCTIONS SETTING FN BASIC FUNCTIONS SETTING FN
SET INFORMATION READ UL SET INFORMATION READ UL
PARAMETER SET SP PARAMETER SET SP