27
Electromagnetic Inductive RFID System
User's Manual
SEC
TI
O
N
2
Commun
ic
a
tions
Te
s
t
SECTION 2
Communications Preparations
Testing Communications between Handy Terminal and CF
Reader/Writer
A Test command is used to test communications between the CF Reader/Writer and Handy Terminal.
This enables checking the CF card slot connection and communications processing before performing
trial operation of the system.
1.
Send a Test command from the Handy Terminal.
Refer to
for information on using the Test command.
2.
The CF Reader/Writer will return the received data if the communications network is operating nor-
mally.
Refer to
if there is no response from the CF Reader/Writer.
Testing Communications between Tags and CF Reader/Writer
Actual commands are used to test communications between Tags and the CF Reader/Writer.
1.
Enter the Read command from the Handy Terminal.
Refer to
for information on how to use the command.
2.
Bring the antenna on the CF Reader/Writer close to the Tag.
Keep the surface of the antenna on the CF Reader/Writer parallel to the Tag surface.
Summary of Contents for V670-CF01
Page 2: ......