10
S
E
CT
ION 1
F
eat
u
re
s
Electromagnetic Inductive RFID System
User's Manual
SECTION 1
Product Outline
Features
The V670-CF01 CF Reader/Writer combines the V670-series Antenna and Controller into a single unit with a
CF interface. It has superior portability and operability because it can be by slotting it into a CF card slot (Type
II) on a Handy Terminal. Tag data can be read and written using serial communications from the Handy
Terminal.
for detailed Tag specifications.
Ferroelectric memory (FeRAM) is a type of non-volatile memory that can write data much faster than previous types of memory,
such as EEPROM and flash ROM, and it has a semipermanent writing life. Furthermore, the previous types of memory could no
longer hold data if nothing had been written to the memory for a certain period (approximately 10 years). FeRAM, on the other
hand, is far better for data storage because it can hold data as long as data is read or written within a specific period of time.
The following three types of ID Tags (“Tags”) can be used with the CF Reader/Writer.
Model
Description
V670-D13F03
The V670-D13F03 ID Tag has a memory capacity of 128 bytes. It is a 40
×
40 mm square tag with water-resistant properties. It also uses a highly effi-
cient, non-volatile ferroelectric memory, called FeRAM, as internal mem-
ory. FeRAM has a semipermanent life (i.e., it can be accessed 1 billion
times).
V670-D13F01
The V670-D13F01 ID Tag is a 8
×
16 mm rectangular tag. It is highly
chemical resistant because a PPS case and highly chemical-resistant
epoxy resin is used on the exterior. It has the same memory capacity and
performance as the V670-D13F03.
V670-D13F01H
The V670-D13F01H ID Tag has the same performance and construction
as the V670-D13F01. It has holes for easy mounting.
CF Reader/Writer
V670-CF01
Handy Terminal
RZ-N155S (Manufactured by Sharp)
PDT8046 (Manufactured by Symbol Technology)
Protective Cover
V670-A75SH155S
V670-A75SY8046
Summary of Contents for V670-CF01
Page 2: ......