![background image](http://html1.mh-extra.com/html/omron/v640-hs61/v640-hs61_user-manual_741375085.webp)
83
CIDRW System
User’s Manual
SECTION 4
When SECS Is Used
SECTION 4
Reading from/Writing to ID Tags
• Subsystem Command (ChangeState)
S18,F12
Write ID Acknowledge
S,H
←
E
L,3
1.<TARGETID>
"01"-"31"
2.<SSACK>
3.L,s
1.<STATUS1>
⋅
s.<STATUSs>
• When the specified target is invalid:
s = 0, SSACK = "CE" communications error
• When there is an MID length error:
s = 0, SSACK = "CE" communications error
• If the MID data contains Non-Visible ASCII characters:
s = 0, SSACK = "EE" execution error
• If the status of SSACK is other than "NO" (normal), the List of Status will comprise zero items.
S18,F13
Subsystem Command Request (ChangeState)
S,H
→
E,reply
L,3
1.<TARGETID>
"00" (fixed)
2.<SSCMD>
"ChangeState"
3.L,1
1.<CPVAL1>
V700-L22: "OP", "MT", or
"PS"
V700-L22-V2: "OP", "MT",
"PS", "CP", or "ST"
• CPVAL = "PS" is a parameter setting unique to this CIDRW Controller for switching to the Setting mode.
• CPVAL1 = “CP” is a parameter unique to this CIDRW Controller that enables changing to a state to use SECS to change
parameters.
• CPVAL1 = “ST” is a parameter unique to this CIDRW Controller that validates values of parameters changed with the unique
“CP” mode.
S18,F14
Subsystem Command Acknowledge (ChangeState)
S,H
←
E
L,3
1.<TARGETID>
"00"
2.<SSACK>
3.L,s
1.<STATUS1>
⋅
s.<STATUSs>
• When the specified target is invalid:
s = 0, SSACK = "CE" communications error
• When SSCMD is invalid:
s = 0, SSACK = "CE" communications error
• When OperationalStatus is BUSY:
s = 0, SSACK = “EE” execution error
• If the status of SSACK is other than "NO" (normal), the List of Status will comprise zero items.
Summary of Contents for V640-HS61
Page 14: ...12 INTRODUCTION Reading this Manual CIDRW System User s Manual INTRODUCTION MEMO...
Page 120: ...118 SECTION 5 When SECS Is Not Used CIDRW System User s Manual SECTION 5 Troubleshooting MEMO...
Page 171: ...CIDRW System User s Manual SECTION 6 Protective Construction SECTION 6 Appendix 169 MEMO...
Page 173: ......