50
Section 3
Switch Settings
RFID System
Operation Manual
Section 3
Preparing Communications
Switch Settings
Opening the Cover
Insert the tip of a small flat-blade screwdriver into the notch in the cover and open the cover.
Setting the Switches
Set the switches as shown below.
DIP Switch SW3
DIP Switch SW4
Controller Number Switches (SW1 and SW2)
Mode Switch
(SW5)
Terminating
Resistance
Switch (SW6)
Rotary Switches (SW1 and SW2)
DIP Switches (SW3 and SW4)
Toggle Switches (SW5 and SW6)
Summary of Contents for V600 Series
Page 50: ...48 Section 2 Wiring RFID System Operation Manual Section 2 Installation and Wiring MEMO ...
Page 72: ...70 Section 4 Write Command Memory RFID System Operation Manual Section 4 Function ...
Page 138: ...136 Section 5 End Codes RFID System Operation Manual Section 5 Communications MEMO ...