214
SECTION
8
Se
rial Int
erf
ac
e
(Nor
ma
l)
V530-R160
Operation Manual
SECTION 8
Communication with the Host
I/O Format
Input Format (Command Format)
The following commands can be input from the host to the controller.
Match the communications specifications of the controller and the host in advance.
• 1:1 connection
1. Specifies the name of the command.
2. Insert one space. (A blank box indicates that a space must be inserted.)
3. Specification is required here for some of the commands input in the boxes indicated by num-
ber (1). Make numerical or other settings if necessary.
4. Input the <Footer> at the end of a command.
• 1:N (multi drop) connection
1. Specifies the name of the command.
2. Insert one space. (A blank box indicates that a space must be inserted.)
3. In a 1:N (multi drop) connection, set the unit number (01 to 31) of the controller the command
is to be sent to.
4. Specification is required here for some of the commands input in the boxes indicated by num-
ber (1). Make numerical or other settings if necessary.
5. Input the <Footer> at the end of a command.
For details on the format for each command, refer to
Command Format.
@
X
<Parameter>
X
<Footer>
1.
2.
3.
4.
@
X
<Parameter>
X
<Footer>
1.
2.
3.
4.
<Unit number>
5.
