11
V530-R160
Operation Manual
IN
TR
OD
UC
TION
SECTION
1
SECTION
2
SECTIO
N
3
SE
CTION
4
SECTI
O
N
5
SECTION
6
SECTION
7
SECTIO
N
8
SECTION
9
SE
C
T
IO
N
10
INTRODUCTION
Touching Signal Lines
To prevent damage from static electricity, use a wrist strap or another device for preventing elec-
trostatic discharges when touching terminals or signal lines in connectors.
Removing the Memory Card
Before removing a Memory Card, stop the power supply to the Card or turn OFF the V530-R160.
The Memory Card or the V530-R160 itself may be damaged if a Memory Card is removed while
power is being supplied.
(Stop the power supply to the Memory Card from the menu.
Refer to page 172.)
Turning OFF the Power
Do not turn OFF the power while a message is being displayed indicating that processing is
being performed. Data in memory will be destroyed, and the V530-R160 may not operate cor-
rectly the next time it is started.
Using the RESET Signal
Do not use the RESET input immediately after power is turned ON. When using RESET input to
synchronize execution timing, wait at least 1 second after turning ON the V530-R160 power sup-
ply before turning ON the RESET signal.
