105
RUN Mode
Section 5-2
When Detail Data is ON:
Detailed data of reading codes are displayed.
QR Code (Normal or Pattern Mode)
Data Matrix (Normal or Pattern Mode)
Set Symbol Color
Displays the setting of the symbol color.
Right&Left Reverse
Displays the setting of right & left reversal.
Set Gray Edge Value (Normal only)
Displays the setting of the gray edge value.
Set Gray Edge Retry Value (Normal only) Displays the setting of the gray edge retry value.
Set Pixel Skipping (Pattern only)
Displays the setting for pixel skipping.
Set Correlation (Pattern only)
Displays the setting for correlation.
Set Version (Pattern only)
Displays the setting of the QR code version.
Set Timeout
Displays the setting of the timeout time.
Error Correction Level
Displays the error correction level read from the code.
Model
Displays the model read from the code.
Version
Displays the version of QR code read from the code.
Thresh Value
Displays the threshold value used for decoding.
Pixel/Cell
Displays the pixels/cells read from the code.
Error Correction
Displays the number of blocks for which error correction
was performed when decoding.
Set Symbol Color
Displays the setting of the symbol color.
Right&Left Reverse
Displays the setting of right & left reversal.
Set Matrix Size
Displays the setting of the matrix size.
Set Finder Length (Normal only)
Displays the setting of the finder length.
Set Correlation (Pattern only)
Displays the setting for correlation.
Set Timeout
Displays the setting of the timeout time.
L End Point (Normal only)
Displays the coordinates of the end point of the finder.
Length of Finder
Displays the finder length found when decoding.
665ms
Set Symbol Color: Black Right&Left Reverse: OFF
Set Matrix Size: 12-12, 0-0
Set Finder Length: 295
Set Timeout: 1000
L End Point (144, 349), (150, 58), (421, 361)
Length of Finder=291,277
Thresh Value=52, 46, 49(0)
Pixel/Cell=24.2, 23.1
Error Correction=0
RUN
Freeze (19)
1234567890