Omron V430-F-series, User Manual, Page: 45 / 404

1-26
Auto Focus Multi Code Reader V430-series User’s Manual (Z392)
MicroHAWK ID Part Numbers
Step 9 — Configure the Reader in ESP
Click the App Mode button to make configuration changes to the V430-series reader.
The following modes are accessible by clicking the buttons in the first row of App Mode icons:
• Click EZ Mode to return to EZ Mode from App Mode.
• Click Autoconnect to establish communication (appears as Connect for the V430).
• Click Send/Recv to send or receive commands.
• Click Switch Model to open the model menu, to return to a previous reader model, or to
remove a previous reader model.
• Click Parameters to show the tabbed tree controls for Communication , Read Cycle ,
Symbologies , I/O Parameters , Symbol Quality , Matchcode , and Diagnostics .
• Click Setup to access a Camera Setup tree control and the tabbed user interfaces for
Video , Evaluation , Calibration , WOI (Window of Interest) , Configuration Database ,
Ordered Output , Output Format , and Dynamic Setup .
• Click Terminal to display decoded symbol data and to send serial commands to the
reader using text or macros.
• Click Utilities to access the tabbed user interfaces for Read Rate , Counters , Device
Control , Differences from Default , Master Database , and Firmware .