11-16
Auto Focus Multi Code Reader V430-series User’s Manual (Z392)
Load Current Settings from Configuration Database
Load Current Settings from Configuration Database
Example:
<K255-,
5
>
This command phrase loads the configuration settings contained in database index 5 to
current, active configuration settings.
Load Current Settings from Configuration Database by ESP
Notes on Symbol Type
• The
current
DataBar Expanded status does not change if it is configured as Enabled
(Stacked) and the
database
DataBar Expanded status is Enabled.
• The
current
DataBar-14 status does not change if it is configured as Enabled (Stacked)
and the
database
DataBar Expanded status is Enabled.
• Data Matrix ECC level is determined by the
current
settings and not by
database
settings.
Therefore, the database does not know which ECC level to enable, and has no effect on
current Data Matrix ECC settings.
Definition:
Allows the configuration settings contained in a selected database index to
be loaded to current, active configuration settings.
Serial Cmd:
<
K255-,
index
>
Click the
Load Index to Current
button to load configuration settings
from the selected index to current,
active settings.
Summary of Contents for V430-F-series
